Join our marketplace now! Get your discount right now.

NetApp DS224C : The ultimate guide

I. Introduction

  • The NetApp DS224C is a high-performance storage solution designed to meet the complex data management needs of modern organizations. Its robust design and advanced features make it an integral part of any efficient data storage system.
  • Understanding the importance of the NetApp DS224C in the broader context of storage solutions is crucial for IT professionals and organizations looking to optimize their data management strategies.
  • This article will provide a detailed overview of the NetApp DS224C, its technical specifications, role in FlexPod architecture, software licensing options, support licensing options, and its place in the NetApp MetroCluster IP solution.

II. Technical Specifications of NetApp DS224C

  • The NetApp DS224C disk shelf is known for its high density and performance. It supports a variety of drives and offers a significant storage capacity, making it a versatile choice for many storage environments.
  • Its supported drives and storage capacity are extensive, allowing for a flexible and scalable storage solution that can grow with your organization’s needs.
  • With various connectivity options, the DS224C integrates seamlessly into existing network infrastructures, ensuring efficient data transfer and accessibility.
  • A comparison with other NetApp disk shelves will highlight the unique features and advantages of the DS224C, solidifying its position as a top choice for storage solutions. Further details can be found in the NetApp DS224C Technical Specifications.

III. NetApp Components in FlexPod Architecture

  • The DS224C plays a pivotal role in the FlexPod architecture, a prevalidated data center platform built with NetApp storage systems, Cisco UCS servers, and Cisco Nexus fabric.
  • Its integration with NetApp storage controllers enhances the overall efficiency and performance of the FlexPod solution, ensuring a reliable and cohesive environment for handling demanding workloads.
  • Understanding the licensing options for NetApp software is crucial for optimizing the functionality and cost-effectiveness of your storage solutions. Detailed licensing information can be accessed through NetApp’s official documentation.

IV. NetApp DS224C Software Licensing Options

  • An in-depth overview of the software licensing options available for the NetApp DS224C is essential for leveraging its full capabilities and ensuring compliance.
  • Part numbers and technical specifications of the various software packages will be discussed to aid in identifying the best fit for different business needs.
  • The importance of software licensing in the context of comprehensive storage solutions cannot be understated, as it directly impacts functionality, security, and scalability.

V. NetApp DS224C Support Licensing Options

  • An overview of the support licensing options available for NetApp products, including the DS224C, will help organizations ensure they have the necessary assistance and resources for maintaining their storage infrastructure.
  • Part numbers and technical specifications for these options will be provided to facilitate informed decision-making.
  • The importance of support licensing in maintaining a robust, efficient, and reliable storage infrastructure is a critical aspect of data management strategies.

VI. NetApp MetroCluster IP Solution

  • The MetroCluster IP solution is a unique offering from NetApp that provides continuous data availability, disaster recovery, and seamless data mobility.
  • A comparison with other NetApp solutions will showcase the distinct advantages and scenarios where MetroCluster IP is the most beneficial.
  • Understanding the architecture, design, and disaster recovery capabilities of the MetroCluster IP solution is vital for organizations looking to enhance their data protection strategies. The MetroCluster IP Solution Architecture and Design document offers an in-depth analysis.

NetApp DS224C Power Requirements

Understanding the power requirements of the NetApp DS224C is crucial for planning and maintaining an efficient and reliable data center infrastructure. The power specifications not only determine the operational capabilities of the disk shelf but also influence the overall energy consumption and heat output within the data center.

DS224C Power Supply Units

  • The NetApp DS224C comes equipped with dual redundant power supply units (PSUs) to ensure continuous operation even if one PSU fails. This redundancy is critical for maintaining data availability and protecting against power disruptions.
  • Each PSU is hot-swappable, allowing for maintenance or replacement without interrupting the disk shelf’s operation. This feature ensures that the system remains operational, providing a seamless experience for users and administrators.

Input Voltage

  • The DS224C supports a wide range of input voltages, typically from 100 to 240 volts alternating current (VAC). This allows the disk shelf to operate in various geographical locations and adapt to different power supply standards without requiring additional converters.
  • It’s essential to ensure that your data center’s power distribution units (PDUs) are compatible with the DS224C’s voltage requirements and that they can handle the cumulative load of all connected devices.

DS224C Power Consumption

  • Power consumption for the NetApp DS224C can vary based on the type and number of drives installed, the workload, and the configuration of the system. Generally, the disk shelf is designed to be energy efficient while delivering high performance.
  • To estimate the power consumption and heat output of your specific configuration, NetApp provides a comprehensive power calculator tool. This tool helps in planning for adequate power supply and cooling in the data center.

DS224C Cooling and Airflow

  • Proper cooling is essential for maintaining the performance and longevity of the DS224C. The disk shelf is designed with an efficient airflow system that works in tandem with the data center’s cooling system to dissipate heat effectively.
  • Ensure that the rack’s airflow design follows NetApp’s guidelines, with adequate space for front-to-back or back-to-front cooling, depending on the model and configuration.

Environmental Considerations

  • Operating the DS224C within the recommended temperature and humidity ranges is vital for optimal performance and reliability. The acceptable range is typically between 10°C and 40°C (50°F and 104°F) with a relative humidity of 20% to 80%.
  • Monitoring the environmental conditions within the data center can prevent overheating and humidity-related issues, thus prolonging the life of the disk shelf and the drives it contains.

NetApp DS224C Technical Specifications

The NetApp DS224C disk shelf is a high-density, performance-oriented storage solution designed to accommodate a range of storage needs. Below are the detailed technical specifications presented in tabular format for clarity and ease of reference.

NetAPP DS224C General Specifications

Form Factor2U rack-mounted
Disk Shelf ModelDS224C
Drive Count24
Supported DrivesSSDs, SAS, and NL-SAS
Maximum CapacityVaries based on the drives used (refer to capacity section)
Weight (Fully Loaded)Approximately 34 kg (75 lbs)
ControllersCompatible with multiple NetApp controllers

NetAPP DS224C Capacity and Performance

Drive TypesSSD (960GB, 1.92TB, 3.84TB, 7.68TB, 15.3TB)
SAS (300GB, 600GB, 900GB, 1.2TB, 1.8TB)
NL-SAS (4TB, 6TB, 8TB, 10TB, 12TB)
Total CapacityUp to 367TB with 15.3TB SSDs
IOPSVaries based on configuration and workload
ThroughputVaries based on configuration and workload

NetAPP DS224C Connectivity

Host Interface12Gb/sec SAS interface
I/O ModulesQuad-path redundancy to each drive for reliability and performance
SAS Ports4 SAS ports per IOM (Input/Output Module) for connection to the storage array

Power and Environmental

Power Supplies2 redundant, hot-swappable power supplies
Input Voltage100 to 240 VAC
Frequency50/60 Hz
Power ConsumptionVaries based on configuration and workload
Operating Temperature10°C to 40°C (50°F to 104°F)
Relative Humidity20% to 80% (non-condensing)

Physical Dimensions

Height8.7 cm (3.4 inches)
Width44.7 cm (17.6 inches)
Depth57.6 cm (22.7 inches)
Rack Units2U

Compliance and Standards

Electromagnetic CompatibilityFCC, VCCI, KCC, RCM

Additional Features

ManagementOnboard ACP (Alternate Control Path) for out-of-band management
RedundancyDual redundant, hot-swappable components for high availability

Please note that the specifications listed above are subject to change and may vary based on the configuration and specific model of the DS224C. For the most accurate and up-to-date information, always refer to the official NetApp documentation or contact NetApp directly. The DS224C is designed to integrate seamlessly with a variety of NetApp systems and software, offering flexibility and performance for a wide range of storage needs.


  • Addressing frequently asked questions such as the supported drives for NetApp DS224C, its integration with FlexPod architecture, and the differences between MetroCluster IP and other NetApp solutions will provide readers with a quick reference and deeper understanding of these complex topics.

This article aims to provide a comprehensive understanding of the NetApp DS224C, its role in storage solutions, and how it integrates with broader architectures and licensing frameworks. Through detailed analysis and comparison, readers will gain insights into optimizing their storage infrastructure using NetApp’s innovative technologies.

    Leave a Reply

    Your email address will not be published. Required fields are marked *